Knowledge

Zamak

Source 📝

31: 1617:
for the zamak series of zinc alloys; all other zinc alloys are compared to this. Zamak 3 has the base composition for the zamak alloys (96% zinc, 4% aluminum). It has excellent castability and long term dimensional stability. More than 70% of all North American zinc die castings are made from zamak
629:
Zamak 2 has the same composition as zamak 3 with the addition of 3% copper in order to increase strength by 20%, which also increases the price. Zamak 2 has the greatest strength out of all the zamak alloys. Over time it retains its strength and hardness better than the other alloys; however, it
4843: 4397: 176:
in Britain had licensed the New Jersey zamak alloy. The 99.99%-purity refluxer zinc was not available in Britain and so they acquired the right to manufacture the alloy using a locally available electrolytically refined zinc of 99.95% purity. This was given the name
3786:
Zamak 7 has less magnesium than zamak 3 to increase fluidity and ductility, which is especially useful when casting thin wall components. In order to reduce inter-granular corrosion a small amount of nickel is added and impurities are more strictly controlled.
4999: 5025: 5075: 4697: 4945: 5096: 4973: 4817: 4271:
Common uses for zamak alloys include appliances, bathroom fixtures, die cast toys and automotive industry. Zamak alloys are also used in the manufacture of some firearms such as those from
4768: 4796: 1327:
The KS alloy was developed for spin casting decorative parts. It has the same composition as zamak 2, except with more magnesium in order to produce finer grains and reduce the
4443: 4275:. In World War 2, zamak alloy buttplates were one of three variations common on Canadian and American-made .303 Lee Enfield rifles, particularly during mid-war production. 182: 4648: 5257: 2539: 173: 130:
The most common zamak alloy is zamak 3. Besides that, zamak 2, zamak 5 and zamak 7 are also commercially used. These alloys are most commonly
5291: 2860:
Zamak 5 has the same composition as zamak 3 with the addition of 1% copper in order to increase strength (by approximately 10%),
5147: 5119: 4735: 2542:
while maintaining the ductility of zamak 3. This was achieved by using half the amount of copper from the zamak 5 composition.
4925: 4657: 4603: 4427: 4368: 80:
alloy family; they are distinguished from the other ZA alloys because of their constant 4% aluminium composition.
5243: 5316: 5051: 4864: 641:. It was originally designed for low volume sheet metal dies. It later gained popularity for making short run 5321: 5178: 5144: 5116: 4567: 4511: 145:, owing to impurities in the alloys. Zamak avoided this by the use of 99.99% pure zinc metal, produced by 5304:
Charles R. Stratton, British Enfield Rifles, Vol 2, North Cape Publications, 1999 and 2003, pages 106-107
161: 5263: 4308: 185:
licensed the refluxer patent with the intent of using it to produce 99.99% zinc in their plant at
146: 124: 201:
Zinc alloy chemical composition standards are defined per country by the standard listed below:
5292:"An Official Journal of the NRA | Pistol-Caliber Pairing: Hi-Point's Affordable Firearms" 4947:
ASTM B240: Standard specification for zinc in ingot form for die casting: chemical composition
181:, partly to distinguish it from zamak and partly from the initials of Morris Ashby. In 1933, 17: 5336: 1328: 5202: 5077:
AS1881 - Australia standard - Zinc alloys - casting ingots and casting requirements (1986)
4895: 607:
The Short European Designation code breaks down as follows (using ZL0430 as the example):
8: 638: 5001:
EN1774 Standard - zinc and zinc alloys - alloys for foundry purposes - ingot and liquid
5223: 4470:
Now defunct due to standardization of European countries under EN 1774 & EN 12844.
5153: 5125: 4921: 4741: 4599: 4423: 4272: 1614: 642: 5277: 5027:
EN12844: Standard - zinc and zinc alloys - castings - specification (September 1998)
4770:
JIS H2201 - Japanese Industrial Standard - Zinc alloy ingot for die casting (1999)
2868:. It also has less dimensional accuracy. Zamak 5 is more commonly used in Europe. 4918:
Building Victory: Aircraft Manufacturing in the Los Angeles Area in World War II,
4593: 4289: 92: 5330: 154: 77: 4975:
ASTM B86: Standard specification for zinc die casting: chemical composition
4346: 190: 135: 4798:
JIS H5301 - Japanese Industrial Standard - Zinc alloy die casting (1979)
4377: 601:
color of the cell is the color of the material designated by ASTM B908.
4284: 2865: 2538:
Zamak 4 was developed for the Asian markets to reduce the effects of
299:
Zamak goes by many different names based on standard and/or country:
186: 142: 66: 62: 46: 4376:, National Aerospace Laboratory NLR, NLR-TP-2005-205, archived from 4370:
Corrosion-induced cracking of model train zinc-aluminum die castings
2861: 134:. Zamak alloys (particularly #3 and #5) are frequently used in the 131: 4870: 646: 189:. It is colloquially known among UK car restoration hobbyists as 88: 4699:
GB8738 - Chinese standard: zinc alloys ingots for casting (2006)
645:
dies. It is also less commonly used for non-sparking tools and
150: 96: 70: 54: 4897:
Cast Kirksite Re-Emerges as RT Approach for Molding Plastics
58: 141:
A large problem with early zinc die casting materials was
5278:"SW380 - Forgotten Pocket Gun That Should Stay Thataway" 614:
P is the use (P=Pressure die casting (casting), L=Ingot)
30: 4866:
Husite Engineering - Benefits of Cast Kirksite Tooling
4595:
ASM Handbook, Volume 14B: Metalworking: Sheet Forming
630:
becomes more brittle, shrinks, and is less elastic.
4420:A History of the Zinc Smelting Industry in Britain 4366: 5328: 4175:Fatigue strength (reverse bending 5x10 cycles) 3660:Fatigue strength (reverse bending 5x10 cycles) 2412:Fatigue strength (reverse bending 5x10 cycles) 1201:Fatigue strength (reverse bending 5x10 cycles) 2767:Fatigue strength (rotary bending 5x10 cycles) 160:Zamak can be electroplated, wet painted, and 4889: 4887: 4417: 4367:Wanhill, R.J.H.; Hattenberg, T. (May 2005), 617:04 is the percent aluminum (04= 4% aluminum) 118: 112: 106: 100: 5020: 5018: 5016: 4893: 4857: 2830:755.6—784.0 BTU-in/hr-ft-°F @ 212 °F 5244:"Zamak Alloys in the automotive industry" 5173: 5171: 5169: 5070: 5068: 4994: 4992: 4990: 4940: 4938: 4936: 4934: 4884: 4838: 4836: 4834: 4650:Alloy designation - cross reference table 4643: 4641: 4639: 4637: 4635: 4968: 4966: 4964: 4962: 4730: 4728: 4726: 4724: 4722: 4720: 4718: 4716: 4714: 4692: 4690: 4688: 4686: 4684: 4682: 4680: 4678: 4676: 4633: 4631: 4629: 4627: 4625: 4623: 4621: 4619: 4617: 4615: 4591: 4392: 4390: 4341: 4339: 4337: 4335: 4333: 4331: 4329: 4327: 4325: 4188: 4147: 3774: 3673: 3632: 3624: 2837: 2780: 2739: 2526: 2425: 2384: 2376: 1601: 1582: 1525: 1517: 1315: 1214: 1173: 1165: 29: 5013: 4791: 4789: 4787: 4785: 4763: 4761: 4759: 4757: 4562: 4560: 4558: 4556: 4554: 4552: 4466: 4464: 4462: 14: 5329: 5262:, Met-Mex Peñoles S.A., archived from 5195: 5166: 5089: 5065: 4987: 4931: 4831: 4550: 4548: 4546: 4544: 4542: 4540: 4538: 4536: 4534: 4532: 4506: 4504: 4502: 4500: 4498: 4496: 2864:and corrosive resistance, but reduces 620:3 is the percent copper (3= 3% copper) 5121:Zinc alloy mechanical characteristics 5046: 5044: 5042: 4959: 4711: 4673: 4612: 4494: 4492: 4490: 4488: 4486: 4484: 4482: 4480: 4478: 4476: 4445:World wide zinc die casting standards 4387: 4322: 4199:Solidification range (melting range) 3695:Solidification range (melting range) 3614:38 ft-lbf (41 ft-lbf aged) 2791:Solidification range (melting range) 2447:Solidification range (melting range) 2366:34 ft-lbf (41 ft-lbf aged) 1536:Solidification range (melting range) 1236:Solidification range (melting range) 4920:p. 86, 119, 120, Cypress, CA, 2013. 4782: 4754: 4459: 2732:45 ft-lbf (5 ft-lbf aged) 1155:28 ft-lbf (5 ft-lbf aged) 5204:Zinc Alloy 7; AG40B; Zn-4Al-0.015Mg 5149:Zinc alloy physical characteristics 4529: 24: 5039: 4473: 99:of which the alloys are composed: 25: 5348: 5310: 4894:Armstrong, Paul J.; Petch, Bill, 4418:Cocks, E.J.; Walters, B. (1968), 4210:Coefficient of thermal expansion 3791:Zamak 7 composition per standard 3717:Coefficient of thermal expansion 2872:Zamak 5 composition per standard 2813:Coefficient of thermal expansion 2546:Zamak 4 composition per standard 2469:Coefficient of thermal expansion 1622:Zamak 3 composition per standard 1558:Coefficient of thermal expansion 1258:Coefficient of thermal expansion 653:Zamak 2 composition per standard 205:Zinc alloy standards per country 2827:108.9—113.0 W/m-K @ 100 °C 2602:Ningbo Jinyi Alloy Material Co. 127:developed zamak alloys in 1929. 5298: 5284: 5270: 5250: 5236: 5216: 5138: 5110: 4910: 4810: 4585: 637:when gravity cast for use as a 303:Various names for zamak alloys 4436: 4411: 4360: 4301: 1215:130 Brinell (98 Brinell aged) 13: 1: 5317:Generic Terms For Zinc Alloys 4845:ZL2/ZL0430/ZnAl4Cu3 (Zamak 2) 4295: 4123:Yield strength (0.2% offset) 3750:Latent heat (heat of fusion) 3597:Yield strength (0.2% offset) 3592:48,000 psi (39,000 psi aged) 2715:Yield strength (0.2% offset) 2502:Latent heat (heat of fusion) 2349:Yield strength (0.2% offset) 1504:Yield strength (0.2% offset) 1291:Latent heat (heat of fusion) 1138:Yield strength (0.2% offset) 76:Zamak alloys are part of the 5322:Zinc Die Casting Alloy Guide 5180:Zinc Die Casting Alloy Guide 196: 7: 4278: 4164:Compressive yield strength 3649:Compressive yield strength 2756:Compressive yield strength 2401:Compressive yield strength 1190:Compressive yield strength 323:Short European designation 10: 5353: 4399:ZL3/ZL0400/ZnAl4 (Zamak 3) 4112:Ultimate tensile strength 4084:Impurity Alloying element 4083: 3781: 3586:Ultimate tensile strength 2855: 2704:Ultimate tensile strength 2533: 2338:Ultimate tensile strength 2309: 1608: 1493:Ultimate tensile strength 1127:Ultimate tensile strength 624: 611:Z is the material (Z=Zinc) 600: 162:chromate conversion coated 4193: 4106: 4004: 3925: 3846: 3800: 3797: 3795: 3745:2.57 μΩ-in at 68 °F 3742:6.54 μΩ-cm at 20 °C 3689: 3580: 3483: 3404: 3325: 3246: 3167: 3088: 3009: 2930: 2881: 2878: 2876: 2785: 2698: 2601: 2555: 2552: 2550: 2497:2.51 μΩ-in at 68 °F 2494:6.37 μΩ-cm at 20 °C 2441: 2332: 2230: 2151: 2072: 1993: 1914: 1835: 1756: 1677: 1631: 1628: 1626: 1530: 1487: 1390: 1344: 1341: 1339: 1286:2.70 μΩ-in at 68 °F 1283:6.85 μΩ-cm at 20 °C 1230: 1121: 1024: 945: 866: 787: 708: 662: 659: 657: 633:Zamak 2 is also known as 584: 578: 575: 572: 566: 563: 560: 557: 551: 548: 517: 514: 511: 499: 496: 490: 487: 479: 440: 437: 434: 422: 419: 413: 410: 382: 379: 376: 370: 364: 361: 355: 348: 61:and alloying elements of 4592:Semiatin, S. L. (2006). 4310:Zamak Latest Status Info 3772:Coefficient of friction 2835:Electrical conductivity 2524:Coefficient of friction 1599:Coefficient of friction 1580:Electrical conductivity 1313:Coefficient of friction 167: 5053:KS (spin casting alloy) 4266: 4243:Specific heat capacity 4232:Electrical resistivity 4145:Elongation at fracture 3761:Specific heat capacity 3739:Electrical resistivity 3630:Elongation at fracture 3589:331 MPa (270 MPa aged) 2843:Specific heat capacity 2513:Specific heat capacity 2491:Electrical resistivity 2382:Elongation at fracture 1588:Specific heat capacity 1302:Specific heat capacity 1280:Electrical resistivity 1171:Elongation at fracture 1130:397 MPa (331 MPa aged) 311:Short composition name 125:New Jersey Zinc Company 4107:Mechanical properties 3679:Modulus of elasticity 3581:Mechanical properties 2699:Mechanical properties 2431:Modulus of elasticity 2333:Mechanical properties 1488:Mechanical properties 1220:Modulus of elasticity 1122:Mechanical properties 119: 113: 107: 101: 35: 4598:. ASM International. 4221:Thermal conductivity 3728:Thermal conductivity 2824:Thermal conductivity 2480:Thermal conductivity 1569:Thermal conductivity 1322: 1269:Thermal conductivity 57:with a base metal of 33: 4254:Casting temperature 4227:784 BTU-in/hr-ft-°F 4194:Physical properties 3734:756 BTU-in/hr-ft-°F 3690:Physical properties 2786:Physical properties 2486:784 BTU-in/hr-ft-°F 2442:Physical properties 1575:729 BTU-in/hr-ft-°F 1531:Physical properties 1275:729 BTU-in/hr-ft-°F 1231:Physical properties 649:for metal spinning. 172:In the early 1930s, 5224:"Zamak is an alloy" 4092: 4091:Zamak 7 properties 3792: 3566: 3565:Zamak 5 properties 2873: 2684: 2683:Zamak 4 properties 2547: 2318: 2317:Zamak 3 properties 1623: 1473: 1336: 1107: 1106:Zamak 2 properties 654: 338:Germany DIN 1743-2 304: 206: 4090: 3847:ASTM B240 (Ingot) 3798:Alloying elements 3790: 3564: 3247:JIS H2201 (Ingot) 2931:ASTM B240 (Ingot) 2879:Alloying elements 2871: 2762:60,000—87,000 psi 2751:31,000—38,000 psi 2721:32,000—39,000 psi 2682: 2553:Alloying elements 2545: 2316: 1994:JIS H2201 (Ingot) 1678:ASTM B240 (Ingot) 1629:Alloying elements 1621: 1471: 1342:Alloying elements 1334: 1105: 709:ASTM B240 (Ingot) 660:Alloying elements 652: 544:ZP5, ZA-5, ZN-005 524:ZL5, ZA-5, ZN-005 480:Used in Asia only 467:ZP3, ZA-3, ZN-003 447:ZL3, ZA-3, ZN-003 406:ZP2, ZA-2, ZN-002 389:ZL2, ZA-2, ZN-002 335:France NFA 55-010 302: 260:AS 1881 - SAA H64 257:AS 1881 - SAA H63 204: 36: 5098:zamak 4 (Alloy 4) 4926:978-0-9897906-0-4 4819:zamak 4 (Alloy 4) 4605:978-0-87170-710-9 4348:Diecasting Alloys 4273:Hi-Point Firearms 4264: 4263: 4140:42.8 ft-lbf 4088: 4087: 3779: 3778: 3611:52 J (56 J aged) 3562: 3561: 3326:JIS H5301 (Cast) 2853: 2852: 2680: 2679: 2531: 2530: 2363:46 J (56 J aged) 2314: 2313: 2073:JIS H5301 (Cast) 1615:de facto standard 1606: 1605: 1469: 1468: 1320: 1319: 1103: 1102: 643:injection molding 605: 604: 308:Traditional name 297: 296: 183:National Smelting 147:New Jersey Zinc's 53:) is a family of 16:(Redirected from 5344: 5305: 5302: 5296: 5295: 5288: 5282: 5281: 5274: 5268: 5267: 5254: 5248: 5247: 5240: 5234: 5233: 5231: 5230: 5220: 5214: 5213: 5212: 5211: 5199: 5193: 5192: 5191: 5190: 5185: 5175: 5164: 5163: 5162: 5161: 5152:, archived from 5142: 5136: 5135: 5134: 5133: 5124:, archived from 5114: 5108: 5107: 5106: 5105: 5093: 5087: 5086: 5085: 5084: 5072: 5063: 5062: 5061: 5060: 5048: 5037: 5036: 5035: 5034: 5022: 5011: 5010: 5009: 5008: 4996: 4985: 4984: 4983: 4982: 4970: 4957: 4956: 4955: 4954: 4942: 4929: 4916:Parker, Dana T. 4914: 4908: 4906: 4905: 4904: 4891: 4882: 4881: 4880: 4878: 4873:on March 1, 2022 4869:, archived from 4861: 4855: 4854: 4853: 4852: 4840: 4829: 4828: 4827: 4826: 4814: 4808: 4807: 4806: 4805: 4793: 4780: 4779: 4778: 4777: 4765: 4752: 4751: 4750: 4749: 4740:, archived from 4732: 4709: 4708: 4707: 4706: 4694: 4671: 4670: 4669: 4668: 4662: 4656:, archived from 4655: 4645: 4610: 4609: 4589: 4583: 4582: 4581: 4580: 4574: 4564: 4527: 4526: 4525: 4524: 4518: 4508: 4471: 4468: 4457: 4455: 4454: 4453: 4440: 4434: 4433: 4415: 4409: 4408: 4407: 4406: 4394: 4385: 4384: 4382: 4375: 4364: 4358: 4357: 4356: 4355: 4343: 4320: 4319: 4318: 4317: 4305: 4260:743—797 °F 4257:395—425 °C 4249:0.100 BTU/lb-°F 4205:718—729 °F 4202:381—387 °C 4134:Impact strength 4093: 4089: 3926:ASTM B86 (Cast) 3793: 3789: 3767:0.100 BTU/lb-°F 3712:0.24 lb/in 3701:716—727 °F 3698:380—386 °C 3633:3.6% (13% aged) 3608:Impact strength 3567: 3563: 3010:ASTM B86 (Cast) 2874: 2870: 2849:0.100 BTU/lb-°F 2808:0.24 lb/in 2797:716—727 °F 2794:380—386 °C 2773:7,000—8,300 psi 2729:61 J (7 J aged) 2726:Impact strength 2685: 2681: 2548: 2544: 2519:0.100 BTU/lb-°F 2464:0.24 lb/in 2453:718—729 °F 2450:381—387 °C 2385:6.3% (16% aged) 2360:Impact strength 2319: 2315: 1757:ASTM B86 (Cast) 1624: 1620: 1594:0.100 BTU/lb-°F 1553:0.25 lb/in 1542:716—734 °F 1539:380—390 °C 1526:150 Brinell max 1510:< 29,000 psi 1499:< 29,000 psi 1474: 1470: 1337: 1333: 1308:0.100 BTU/lb-°F 1253:0.25 lb/in 1242:714–734 °F 1239:379–390 °C 1152:38 J (7 J aged) 1149:Impact strength 1108: 1104: 788:ASTM B86 (Cast) 655: 651: 305: 301: 207: 203: 122: 116: 110: 104: 21: 5352: 5351: 5347: 5346: 5345: 5343: 5342: 5341: 5327: 5326: 5313: 5308: 5303: 5299: 5290: 5289: 5285: 5280:. 3 April 2019. 5276: 5275: 5271: 5256: 5255: 5251: 5242: 5241: 5237: 5228: 5226: 5222: 5221: 5217: 5209: 5207: 5201: 5200: 5196: 5188: 5186: 5183: 5177: 5176: 5167: 5159: 5157: 5146: 5143: 5139: 5131: 5129: 5118: 5115: 5111: 5103: 5101: 5095: 5094: 5090: 5082: 5080: 5074: 5073: 5066: 5058: 5056: 5050: 5049: 5040: 5032: 5030: 5024: 5023: 5014: 5006: 5004: 4998: 4997: 4988: 4980: 4978: 4972: 4971: 4960: 4952: 4950: 4944: 4943: 4932: 4915: 4911: 4902: 4900: 4892: 4885: 4876: 4874: 4863: 4862: 4858: 4850: 4848: 4842: 4841: 4832: 4824: 4822: 4816: 4815: 4811: 4803: 4801: 4795: 4794: 4783: 4775: 4773: 4767: 4766: 4755: 4747: 4745: 4734: 4733: 4712: 4704: 4702: 4696: 4695: 4674: 4666: 4664: 4660: 4653: 4647: 4646: 4613: 4606: 4590: 4586: 4578: 4576: 4572: 4566: 4565: 4530: 4522: 4520: 4516: 4510: 4509: 4474: 4469: 4460: 4451: 4449: 4442: 4441: 4437: 4430: 4416: 4412: 4404: 4402: 4396: 4395: 4388: 4380: 4373: 4365: 4361: 4353: 4351: 4345: 4344: 4323: 4315: 4313: 4307: 4306: 4302: 4298: 4290:Babbitt (alloy) 4281: 4269: 4216:15.2 μin/in-°F 4153:Shear strength 4102:Imperial value 3784: 3723:15.2 μin/in-°F 3709:6.7 kg/dm 3685:14,000,000 psi 3638:Shear strength 3622: 3619:Elongation at F 3576:Imperial value 3168:EN12844 (Cast) 3089:EN1774 (Ingot) 2858: 2819:15.2 μin/in-°F 2745:Shear strength 2694:Imperial value 2536: 2475:15.2 μin/in-°F 2437:14,000,000 psi 2390:Shear strength 2374: 2371:Elongation at F 2328:Imperial value 1915:EN12844 (Cast) 1836:EN1774 (Ingot) 1613:Zamak 3 is the 1611: 1564:15.4 μin/in-°F 1483:Imperial value 1335:KS composition 1325: 1264:15.4 μin/in-°F 1250:6.8 kg/dm 1226:14,000,000 psi 1179:Shear strength 1163: 1160:Elongation at F 1117:Imperial value 946:EN12844 (Cast) 867:EN1774 (Ingot) 627: 352: 350: 199: 170: 153:as part of the 28: 23: 22: 15: 12: 11: 5: 5350: 5340: 5339: 5325: 5324: 5319: 5312: 5311:External links 5309: 5307: 5306: 5297: 5283: 5269: 5249: 5235: 5215: 5194: 5165: 5137: 5109: 5088: 5064: 5038: 5012: 4986: 4958: 4930: 4909: 4883: 4856: 4830: 4809: 4781: 4753: 4710: 4672: 4611: 4604: 4584: 4528: 4472: 4458: 4435: 4428: 4410: 4386: 4383:on 2011-07-16. 4359: 4321: 4299: 4297: 4294: 4293: 4292: 4287: 4280: 4277: 4268: 4265: 4262: 4261: 4258: 4255: 4251: 4250: 4247: 4244: 4240: 4239: 4236: 4233: 4229: 4228: 4225: 4222: 4218: 4217: 4214: 4211: 4207: 4206: 4203: 4200: 4196: 4195: 4191: 4190: 4187: 4183: 4182: 4179: 4176: 4172: 4171: 4168: 4165: 4161: 4160: 4157: 4154: 4150: 4149: 4146: 4142: 4141: 4138: 4135: 4131: 4130: 4127: 4124: 4120: 4119: 4116: 4113: 4109: 4108: 4104: 4103: 4100: 4097: 4086: 4085: 4081: 4080: 4077: 4074: 4071: 4068: 4065: 4062: 4059: 4056: 4053: 4050: 4047: 4043: 4042: 4039: 4036: 4033: 4030: 4027: 4024: 4021: 4018: 4015: 4012: 4009: 4006: 4002: 4001: 3998: 3995: 3992: 3989: 3986: 3983: 3980: 3977: 3974: 3971: 3968: 3964: 3963: 3960: 3957: 3954: 3951: 3948: 3945: 3942: 3939: 3936: 3933: 3930: 3927: 3923: 3922: 3919: 3916: 3913: 3910: 3907: 3904: 3901: 3898: 3895: 3892: 3889: 3885: 3884: 3881: 3878: 3875: 3872: 3869: 3866: 3863: 3860: 3857: 3854: 3851: 3848: 3844: 3843: 3840: 3837: 3834: 3831: 3828: 3825: 3822: 3819: 3816: 3813: 3810: 3807: 3803: 3802: 3799: 3796: 3783: 3780: 3777: 3776: 3773: 3769: 3768: 3765: 3762: 3758: 3757: 3756:4.7x10 BTU/lb 3754: 3751: 3747: 3746: 3743: 3740: 3736: 3735: 3732: 3729: 3725: 3724: 3721: 3718: 3714: 3713: 3710: 3707: 3703: 3702: 3699: 3696: 3692: 3691: 3687: 3686: 3683: 3680: 3676: 3675: 3672: 3668: 3667: 3664: 3661: 3657: 3656: 3653: 3650: 3646: 3645: 3642: 3639: 3635: 3634: 3631: 3627: 3626: 3623: 3620: 3616: 3615: 3612: 3609: 3605: 3604: 3601: 3598: 3594: 3593: 3590: 3587: 3583: 3582: 3578: 3577: 3574: 3571: 3560: 3559: 3556: 3553: 3550: 3547: 3544: 3541: 3538: 3535: 3532: 3529: 3526: 3522: 3521: 3518: 3515: 3512: 3509: 3506: 3503: 3500: 3497: 3494: 3491: 3488: 3485: 3481: 3480: 3477: 3474: 3471: 3468: 3465: 3462: 3459: 3456: 3453: 3450: 3447: 3443: 3442: 3439: 3436: 3433: 3430: 3427: 3424: 3421: 3418: 3415: 3412: 3409: 3406: 3402: 3401: 3398: 3395: 3392: 3389: 3386: 3383: 3380: 3377: 3374: 3371: 3368: 3364: 3363: 3360: 3357: 3354: 3351: 3348: 3345: 3342: 3339: 3336: 3333: 3330: 3327: 3323: 3322: 3319: 3316: 3313: 3310: 3307: 3304: 3301: 3298: 3295: 3292: 3289: 3285: 3284: 3281: 3278: 3275: 3272: 3269: 3266: 3263: 3260: 3257: 3254: 3251: 3248: 3244: 3243: 3240: 3237: 3234: 3231: 3228: 3225: 3222: 3219: 3216: 3213: 3210: 3206: 3205: 3202: 3199: 3196: 3193: 3190: 3187: 3184: 3181: 3178: 3175: 3172: 3169: 3165: 3164: 3161: 3158: 3155: 3152: 3149: 3146: 3143: 3140: 3137: 3134: 3131: 3127: 3126: 3123: 3120: 3117: 3114: 3111: 3108: 3105: 3102: 3099: 3096: 3093: 3090: 3086: 3085: 3082: 3079: 3076: 3073: 3070: 3067: 3064: 3061: 3058: 3055: 3052: 3048: 3047: 3044: 3041: 3038: 3035: 3032: 3029: 3026: 3023: 3020: 3017: 3014: 3011: 3007: 3006: 3003: 3000: 2997: 2994: 2991: 2988: 2985: 2982: 2979: 2976: 2973: 2969: 2968: 2965: 2962: 2959: 2956: 2953: 2950: 2947: 2944: 2941: 2938: 2935: 2932: 2928: 2927: 2924: 2921: 2918: 2915: 2912: 2909: 2906: 2903: 2900: 2897: 2894: 2891: 2888: 2884: 2883: 2880: 2877: 2857: 2854: 2851: 2850: 2847: 2846:418.7 J/kg-°C 2844: 2840: 2839: 2836: 2832: 2831: 2828: 2825: 2821: 2820: 2817: 2814: 2810: 2809: 2806: 2803: 2799: 2798: 2795: 2792: 2788: 2787: 2783: 2782: 2779: 2775: 2774: 2771: 2768: 2764: 2763: 2760: 2757: 2753: 2752: 2749: 2746: 2742: 2741: 2738: 2734: 2733: 2730: 2727: 2723: 2722: 2719: 2716: 2712: 2711: 2708: 2705: 2701: 2700: 2696: 2695: 2692: 2689: 2678: 2677: 2674: 2671: 2668: 2665: 2662: 2659: 2656: 2653: 2650: 2647: 2644: 2640: 2639: 2636: 2633: 2630: 2627: 2624: 2621: 2618: 2615: 2612: 2609: 2606: 2603: 2599: 2598: 2595: 2592: 2589: 2586: 2583: 2580: 2577: 2574: 2571: 2568: 2565: 2562: 2558: 2557: 2554: 2551: 2535: 2532: 2529: 2528: 2525: 2521: 2520: 2517: 2514: 2510: 2509: 2508:4.7x10 BTU/lb 2506: 2503: 2499: 2498: 2495: 2492: 2488: 2487: 2484: 2481: 2477: 2476: 2473: 2470: 2466: 2465: 2462: 2459: 2455: 2454: 2451: 2448: 2444: 2443: 2439: 2438: 2435: 2432: 2428: 2427: 2424: 2420: 2419: 2416: 2413: 2409: 2408: 2405: 2402: 2398: 2397: 2394: 2391: 2387: 2386: 2383: 2379: 2378: 2375: 2372: 2368: 2367: 2364: 2361: 2357: 2356: 2353: 2350: 2346: 2345: 2342: 2339: 2335: 2334: 2330: 2329: 2326: 2323: 2312: 2311: 2307: 2306: 2303: 2300: 2297: 2294: 2291: 2288: 2285: 2282: 2279: 2276: 2273: 2269: 2268: 2265: 2262: 2259: 2256: 2253: 2250: 2247: 2244: 2241: 2238: 2235: 2232: 2228: 2227: 2224: 2221: 2218: 2215: 2212: 2209: 2206: 2203: 2200: 2197: 2194: 2190: 2189: 2186: 2183: 2180: 2177: 2174: 2171: 2168: 2165: 2162: 2159: 2156: 2153: 2149: 2148: 2145: 2142: 2139: 2136: 2133: 2130: 2127: 2124: 2121: 2118: 2115: 2111: 2110: 2107: 2104: 2101: 2098: 2095: 2092: 2089: 2086: 2083: 2080: 2077: 2074: 2070: 2069: 2066: 2063: 2060: 2057: 2054: 2051: 2048: 2045: 2042: 2039: 2036: 2032: 2031: 2028: 2025: 2022: 2019: 2016: 2013: 2010: 2007: 2004: 2001: 1998: 1995: 1991: 1990: 1987: 1984: 1981: 1978: 1975: 1972: 1969: 1966: 1963: 1960: 1957: 1953: 1952: 1949: 1946: 1943: 1940: 1937: 1934: 1931: 1928: 1925: 1922: 1919: 1916: 1912: 1911: 1908: 1905: 1902: 1899: 1896: 1893: 1890: 1887: 1884: 1881: 1878: 1874: 1873: 1870: 1867: 1864: 1861: 1858: 1855: 1852: 1849: 1846: 1843: 1840: 1837: 1833: 1832: 1829: 1826: 1823: 1820: 1817: 1814: 1811: 1808: 1805: 1802: 1799: 1795: 1794: 1791: 1788: 1785: 1782: 1779: 1776: 1773: 1770: 1767: 1764: 1761: 1758: 1754: 1753: 1750: 1747: 1744: 1741: 1738: 1735: 1732: 1729: 1726: 1723: 1720: 1716: 1715: 1712: 1709: 1706: 1703: 1700: 1697: 1694: 1691: 1688: 1685: 1682: 1679: 1675: 1674: 1671: 1668: 1665: 1662: 1659: 1656: 1653: 1650: 1647: 1644: 1641: 1638: 1634: 1633: 1630: 1627: 1610: 1607: 1604: 1603: 1600: 1596: 1595: 1592: 1589: 1585: 1584: 1581: 1577: 1576: 1573: 1570: 1566: 1565: 1562: 1559: 1555: 1554: 1551: 1548: 1544: 1543: 1540: 1537: 1533: 1532: 1528: 1527: 1524: 1520: 1519: 1516: 1512: 1511: 1508: 1505: 1501: 1500: 1497: 1494: 1490: 1489: 1485: 1484: 1481: 1478: 1472:KS properties 1467: 1466: 1463: 1460: 1457: 1454: 1451: 1448: 1445: 1442: 1439: 1436: 1433: 1429: 1428: 1425: 1422: 1419: 1416: 1413: 1410: 1407: 1404: 1401: 1398: 1395: 1392: 1388: 1387: 1384: 1381: 1378: 1375: 1372: 1369: 1366: 1363: 1360: 1357: 1354: 1351: 1347: 1346: 1343: 1340: 1324: 1321: 1318: 1317: 1314: 1310: 1309: 1306: 1303: 1299: 1298: 1297:4.7x10 BTU/lb 1295: 1292: 1288: 1287: 1284: 1281: 1277: 1276: 1273: 1270: 1266: 1265: 1262: 1259: 1255: 1254: 1251: 1248: 1244: 1243: 1240: 1237: 1233: 1232: 1228: 1227: 1224: 1221: 1217: 1216: 1213: 1209: 1208: 1205: 1202: 1198: 1197: 1194: 1191: 1187: 1186: 1183: 1180: 1176: 1175: 1172: 1168: 1167: 1164: 1161: 1157: 1156: 1153: 1150: 1146: 1145: 1142: 1139: 1135: 1134: 1131: 1128: 1124: 1123: 1119: 1118: 1115: 1112: 1101: 1100: 1097: 1094: 1091: 1088: 1085: 1082: 1079: 1076: 1073: 1070: 1067: 1063: 1062: 1059: 1056: 1053: 1050: 1047: 1044: 1041: 1038: 1035: 1032: 1029: 1026: 1022: 1021: 1018: 1015: 1012: 1009: 1006: 1003: 1000: 997: 994: 991: 988: 984: 983: 980: 977: 974: 971: 968: 965: 962: 959: 956: 953: 950: 947: 943: 942: 939: 936: 933: 930: 927: 924: 921: 918: 915: 912: 909: 905: 904: 901: 898: 895: 892: 889: 886: 883: 880: 877: 874: 871: 868: 864: 863: 860: 857: 854: 851: 848: 845: 842: 839: 836: 833: 830: 826: 825: 822: 819: 816: 813: 810: 807: 804: 801: 798: 795: 792: 789: 785: 784: 781: 778: 775: 772: 769: 766: 763: 760: 757: 754: 751: 747: 746: 743: 740: 737: 734: 731: 728: 725: 722: 719: 716: 713: 710: 706: 705: 702: 699: 696: 693: 690: 687: 684: 681: 678: 675: 672: 669: 665: 664: 661: 658: 626: 623: 622: 621: 618: 615: 612: 603: 602: 598: 597: 594: 591: 587: 586: 583: 580: 577: 574: 571: 568: 565: 562: 559: 556: 553: 550: 546: 545: 542: 539: 536: 533: 530: 526: 525: 522: 519: 516: 513: 510: 507: 504: 501: 498: 495: 492: 489: 485: 484: 481: 478: 475: 473: 469: 468: 465: 462: 459: 456: 453: 449: 448: 445: 442: 439: 436: 433: 430: 427: 424: 421: 418: 415: 412: 408: 407: 404: 401: 398: 395: 391: 390: 387: 384: 381: 378: 375: 372: 369: 366: 363: 360: 357: 354: 346: 345: 342: 339: 336: 333: 330: 327: 324: 321: 318: 315: 312: 309: 295: 294: 291: 288: 287:International 284: 283: 280: 277: 273: 272: 269: 266: 262: 261: 258: 255: 251: 250: 247: 244: 240: 239: 236: 233: 229: 228: 225: 222: 218: 217: 214: 211: 198: 195: 169: 166: 123:(copper). The 95:names for the 78:zinc aluminium 26: 9: 6: 4: 3: 2: 5349: 5338: 5335: 5334: 5332: 5323: 5320: 5318: 5315: 5314: 5301: 5293: 5287: 5279: 5273: 5266:on 2008-01-10 5265: 5261: 5260: 5259:Metals: Zamak 5253: 5245: 5239: 5225: 5219: 5206: 5205: 5198: 5182: 5181: 5174: 5172: 5170: 5156:on 2012-02-10 5155: 5151: 5150: 5145: 5141: 5128:on 2012-02-10 5127: 5123: 5122: 5117: 5113: 5100: 5099: 5092: 5079: 5078: 5071: 5069: 5055: 5054: 5047: 5045: 5043: 5029: 5028: 5021: 5019: 5017: 5003: 5002: 4995: 4993: 4991: 4977: 4976: 4969: 4967: 4965: 4963: 4949: 4948: 4941: 4939: 4937: 4935: 4927: 4923: 4919: 4913: 4899: 4898: 4890: 4888: 4872: 4868: 4867: 4860: 4847: 4846: 4839: 4837: 4835: 4821: 4820: 4813: 4800: 4799: 4792: 4790: 4788: 4786: 4772: 4771: 4764: 4762: 4760: 4758: 4744:on 2012-02-10 4743: 4739: 4738: 4731: 4729: 4727: 4725: 4723: 4721: 4719: 4717: 4715: 4701: 4700: 4693: 4691: 4689: 4687: 4685: 4683: 4681: 4679: 4677: 4663:on 2011-07-08 4659: 4652: 4651: 4644: 4642: 4640: 4638: 4636: 4634: 4632: 4630: 4628: 4626: 4624: 4622: 4620: 4618: 4616: 4607: 4601: 4597: 4596: 4588: 4571: 4570: 4563: 4561: 4559: 4557: 4555: 4553: 4551: 4549: 4547: 4545: 4543: 4541: 4539: 4537: 4535: 4533: 4515: 4514: 4513:ASTM B86-04e2 4507: 4505: 4503: 4501: 4499: 4497: 4495: 4493: 4491: 4489: 4487: 4485: 4483: 4481: 4479: 4477: 4467: 4465: 4463: 4447: 4446: 4439: 4431: 4429:0-245-59377-2 4425: 4421: 4414: 4401: 4400: 4393: 4391: 4379: 4372: 4371: 4363: 4350: 4349: 4342: 4340: 4338: 4336: 4334: 4332: 4330: 4328: 4326: 4312: 4311: 4304: 4300: 4291: 4288: 4286: 4283: 4282: 4276: 4274: 4259: 4256: 4253: 4252: 4248: 4245: 4242: 4241: 4237: 4234: 4231: 4230: 4226: 4223: 4220: 4219: 4215: 4213:27.4 μm/m-°C 4212: 4209: 4208: 4204: 4201: 4198: 4197: 4192: 4185: 4184: 4180: 4177: 4174: 4173: 4169: 4166: 4163: 4162: 4158: 4155: 4152: 4151: 4144: 4143: 4139: 4136: 4133: 4132: 4128: 4125: 4122: 4121: 4117: 4114: 4111: 4110: 4105: 4101: 4099:Metric value 4098: 4095: 4094: 4082: 4078: 4075: 4072: 4069: 4066: 4063: 4060: 4057: 4054: 4051: 4048: 4045: 4044: 4040: 4037: 4034: 4031: 4028: 4025: 4022: 4019: 4016: 4013: 4010: 4007: 4003: 3999: 3996: 3993: 3990: 3987: 3984: 3981: 3978: 3975: 3972: 3969: 3966: 3965: 3961: 3958: 3955: 3952: 3949: 3946: 3943: 3940: 3937: 3934: 3931: 3928: 3924: 3920: 3917: 3914: 3911: 3908: 3905: 3902: 3899: 3896: 3893: 3890: 3887: 3886: 3882: 3879: 3876: 3873: 3870: 3867: 3864: 3861: 3858: 3855: 3852: 3849: 3845: 3841: 3838: 3835: 3832: 3829: 3826: 3823: 3820: 3817: 3814: 3811: 3808: 3805: 3804: 3794: 3788: 3771: 3770: 3766: 3763: 3760: 3759: 3755: 3752: 3749: 3748: 3744: 3741: 3738: 3737: 3733: 3730: 3727: 3726: 3722: 3720:27.4 μm/m-°C 3719: 3716: 3715: 3711: 3708: 3705: 3704: 3700: 3697: 3694: 3693: 3688: 3684: 3681: 3678: 3677: 3670: 3669: 3665: 3662: 3659: 3658: 3654: 3651: 3648: 3647: 3643: 3640: 3637: 3636: 3629: 3628: 3618: 3617: 3613: 3610: 3607: 3606: 3602: 3599: 3596: 3595: 3591: 3588: 3585: 3584: 3579: 3575: 3573:Metric value 3572: 3569: 3568: 3557: 3554: 3551: 3548: 3545: 3542: 3539: 3536: 3533: 3530: 3527: 3524: 3523: 3519: 3516: 3513: 3510: 3507: 3504: 3501: 3498: 3495: 3492: 3489: 3486: 3482: 3478: 3475: 3472: 3469: 3466: 3463: 3460: 3457: 3454: 3451: 3448: 3445: 3444: 3440: 3437: 3434: 3431: 3428: 3425: 3422: 3419: 3416: 3413: 3410: 3407: 3403: 3399: 3396: 3393: 3390: 3387: 3384: 3381: 3378: 3375: 3372: 3369: 3366: 3365: 3361: 3358: 3355: 3352: 3349: 3346: 3343: 3340: 3337: 3334: 3331: 3328: 3324: 3320: 3317: 3314: 3311: 3308: 3305: 3302: 3299: 3296: 3293: 3290: 3287: 3286: 3282: 3279: 3276: 3273: 3270: 3267: 3264: 3261: 3258: 3255: 3252: 3249: 3245: 3241: 3238: 3235: 3232: 3229: 3226: 3223: 3220: 3217: 3214: 3211: 3208: 3207: 3203: 3200: 3197: 3194: 3191: 3188: 3185: 3182: 3179: 3176: 3173: 3170: 3166: 3162: 3159: 3156: 3153: 3150: 3147: 3144: 3141: 3138: 3135: 3132: 3129: 3128: 3124: 3121: 3118: 3115: 3112: 3109: 3106: 3103: 3100: 3097: 3094: 3091: 3087: 3083: 3080: 3077: 3074: 3071: 3068: 3065: 3062: 3059: 3056: 3053: 3050: 3049: 3045: 3042: 3039: 3036: 3033: 3030: 3027: 3024: 3021: 3018: 3015: 3012: 3008: 3004: 3001: 2998: 2995: 2992: 2989: 2986: 2983: 2980: 2977: 2974: 2971: 2970: 2966: 2963: 2960: 2957: 2954: 2951: 2948: 2945: 2942: 2939: 2936: 2933: 2929: 2925: 2922: 2919: 2916: 2913: 2910: 2907: 2904: 2901: 2898: 2895: 2892: 2889: 2886: 2885: 2875: 2869: 2867: 2863: 2848: 2845: 2842: 2841: 2834: 2833: 2829: 2826: 2823: 2822: 2818: 2816:27.4 μm/m-°C 2815: 2812: 2811: 2807: 2804: 2801: 2800: 2796: 2793: 2790: 2789: 2784: 2777: 2776: 2772: 2769: 2766: 2765: 2761: 2758: 2755: 2754: 2750: 2747: 2744: 2743: 2736: 2735: 2731: 2728: 2725: 2724: 2720: 2717: 2714: 2713: 2709: 2706: 2703: 2702: 2697: 2693: 2691:Metric value 2690: 2687: 2686: 2675: 2672: 2669: 2666: 2663: 2660: 2657: 2654: 2651: 2648: 2645: 2642: 2641: 2637: 2634: 2631: 2628: 2625: 2622: 2619: 2616: 2613: 2610: 2607: 2604: 2600: 2596: 2593: 2590: 2587: 2584: 2581: 2578: 2575: 2572: 2569: 2566: 2563: 2560: 2559: 2549: 2543: 2541: 2540:die soldering 2523: 2522: 2518: 2515: 2512: 2511: 2507: 2504: 2501: 2500: 2496: 2493: 2490: 2489: 2485: 2482: 2479: 2478: 2474: 2472:27.4 μm/m-°C 2471: 2468: 2467: 2463: 2460: 2457: 2456: 2452: 2449: 2446: 2445: 2440: 2436: 2433: 2430: 2429: 2422: 2421: 2417: 2414: 2411: 2410: 2406: 2403: 2400: 2399: 2395: 2392: 2389: 2388: 2381: 2380: 2370: 2369: 2365: 2362: 2359: 2358: 2354: 2351: 2348: 2347: 2343: 2340: 2337: 2336: 2331: 2327: 2325:Metric value 2324: 2321: 2320: 2308: 2304: 2301: 2298: 2295: 2292: 2289: 2286: 2283: 2280: 2277: 2274: 2271: 2270: 2266: 2263: 2260: 2257: 2254: 2251: 2248: 2245: 2242: 2239: 2236: 2233: 2229: 2225: 2222: 2219: 2216: 2213: 2210: 2207: 2204: 2201: 2198: 2195: 2192: 2191: 2187: 2184: 2181: 2178: 2175: 2172: 2169: 2166: 2163: 2160: 2157: 2154: 2150: 2146: 2143: 2140: 2137: 2134: 2131: 2128: 2125: 2122: 2119: 2116: 2113: 2112: 2108: 2105: 2102: 2099: 2096: 2093: 2090: 2087: 2084: 2081: 2078: 2075: 2071: 2067: 2064: 2061: 2058: 2055: 2052: 2049: 2046: 2043: 2040: 2037: 2034: 2033: 2029: 2026: 2023: 2020: 2017: 2014: 2011: 2008: 2005: 2002: 1999: 1996: 1992: 1988: 1985: 1982: 1979: 1976: 1973: 1970: 1967: 1964: 1961: 1958: 1955: 1954: 1950: 1947: 1944: 1941: 1938: 1935: 1932: 1929: 1926: 1923: 1920: 1917: 1913: 1909: 1906: 1903: 1900: 1897: 1894: 1891: 1888: 1885: 1882: 1879: 1876: 1875: 1871: 1868: 1865: 1862: 1859: 1856: 1853: 1850: 1847: 1844: 1841: 1838: 1834: 1830: 1827: 1824: 1821: 1818: 1815: 1812: 1809: 1806: 1803: 1800: 1797: 1796: 1792: 1789: 1786: 1783: 1780: 1777: 1774: 1771: 1768: 1765: 1762: 1759: 1755: 1751: 1748: 1745: 1742: 1739: 1736: 1733: 1730: 1727: 1724: 1721: 1718: 1717: 1713: 1710: 1707: 1704: 1701: 1698: 1695: 1692: 1689: 1686: 1683: 1680: 1676: 1672: 1669: 1666: 1663: 1660: 1657: 1654: 1651: 1648: 1645: 1642: 1639: 1636: 1635: 1625: 1619: 1616: 1598: 1597: 1593: 1590: 1587: 1586: 1579: 1578: 1574: 1571: 1568: 1567: 1563: 1561:28.0 μm/m-°C 1560: 1557: 1556: 1552: 1549: 1546: 1545: 1541: 1538: 1535: 1534: 1529: 1522: 1521: 1514: 1513: 1509: 1507:< 200 MPa 1506: 1503: 1502: 1498: 1496:< 200 MPa 1495: 1492: 1491: 1486: 1482: 1480:Metric value 1479: 1476: 1475: 1464: 1461: 1458: 1455: 1452: 1449: 1446: 1443: 1440: 1437: 1434: 1431: 1430: 1426: 1423: 1420: 1417: 1414: 1411: 1408: 1405: 1402: 1399: 1396: 1393: 1389: 1385: 1382: 1379: 1376: 1373: 1370: 1367: 1364: 1361: 1358: 1355: 1352: 1349: 1348: 1338: 1332: 1330: 1312: 1311: 1307: 1304: 1301: 1300: 1296: 1293: 1290: 1289: 1285: 1282: 1279: 1278: 1274: 1271: 1268: 1267: 1263: 1261:27.8 μm/m-°C 1260: 1257: 1256: 1252: 1249: 1246: 1245: 1241: 1238: 1235: 1234: 1229: 1225: 1222: 1219: 1218: 1211: 1210: 1206: 1203: 1200: 1199: 1195: 1192: 1189: 1188: 1184: 1181: 1178: 1177: 1170: 1169: 1166:3% (2% aged) 1159: 1158: 1154: 1151: 1148: 1147: 1143: 1140: 1137: 1136: 1132: 1129: 1126: 1125: 1120: 1116: 1114:Metric value 1113: 1110: 1109: 1098: 1095: 1092: 1089: 1086: 1083: 1080: 1077: 1074: 1071: 1068: 1065: 1064: 1060: 1057: 1054: 1051: 1048: 1045: 1042: 1039: 1036: 1033: 1030: 1027: 1023: 1019: 1016: 1013: 1010: 1007: 1004: 1001: 998: 995: 992: 989: 986: 985: 981: 978: 975: 972: 969: 966: 963: 960: 957: 954: 951: 948: 944: 940: 937: 934: 931: 928: 925: 922: 919: 916: 913: 910: 907: 906: 902: 899: 896: 893: 890: 887: 884: 881: 878: 875: 872: 869: 865: 861: 858: 855: 852: 849: 846: 843: 840: 837: 834: 831: 828: 827: 823: 820: 817: 814: 811: 808: 805: 802: 799: 796: 793: 790: 786: 782: 779: 776: 773: 770: 767: 764: 761: 758: 755: 752: 749: 748: 744: 741: 738: 735: 732: 729: 726: 723: 720: 717: 714: 711: 707: 703: 700: 697: 694: 691: 688: 685: 682: 679: 676: 673: 670: 667: 666: 656: 650: 648: 644: 640: 636: 631: 619: 616: 613: 610: 609: 608: 599: 595: 592: 589: 588: 585:ZA-7, ZN-007 581: 569: 554: 547: 543: 540: 537: 534: 531: 528: 527: 523: 520: 508: 506:Ingot type 1 505: 502: 493: 486: 483:ZA-4, ZN-004 482: 476: 474: 471: 470: 466: 463: 460: 457: 454: 451: 450: 446: 443: 431: 429:Ingot type 2 428: 425: 416: 409: 405: 402: 399: 396: 393: 392: 388: 385: 373: 367: 358: 347: 343: 340: 337: 334: 331: 328: 325: 322: 319: 316: 313: 310: 307: 306: 300: 292: 289: 286: 285: 281: 278: 275: 274: 270: 267: 264: 263: 259: 256: 253: 252: 248: 245: 242: 241: 237: 234: 231: 230: 226: 223: 220: 219: 216:Zinc casting 215: 212: 209: 208: 202: 194: 192: 188: 184: 180: 175: 165: 163: 158: 156: 152: 148: 144: 139: 137: 133: 128: 126: 121: 115: 109: 103: 98: 94: 90: 86: 81: 79: 74: 72: 68: 64: 60: 56: 52: 48: 44: 40: 32: 19: 5300: 5286: 5272: 5264:the original 5258: 5252: 5238: 5227:. Retrieved 5218: 5208:, retrieved 5203: 5197: 5187:, retrieved 5179: 5158:, retrieved 5154:the original 5148: 5140: 5130:, retrieved 5126:the original 5120: 5112: 5102:, retrieved 5097: 5091: 5081:, retrieved 5076: 5057:, retrieved 5052: 5031:, retrieved 5026: 5005:, retrieved 5000: 4979:, retrieved 4974: 4951:, retrieved 4946: 4917: 4912: 4901:, retrieved 4896: 4875:, retrieved 4871:the original 4865: 4859: 4849:, retrieved 4844: 4823:, retrieved 4818: 4812: 4802:, retrieved 4797: 4774:, retrieved 4769: 4746:, retrieved 4742:the original 4736: 4703:, retrieved 4698: 4665:, retrieved 4658:the original 4649: 4594: 4587: 4577:, retrieved 4575:, 1998-05-01 4569:ASTM B240-98 4568: 4521:, retrieved 4519:, 2004-10-01 4512: 4450:, retrieved 4444: 4438: 4419: 4413: 4403:, retrieved 4398: 4378:the original 4369: 4362: 4352:, retrieved 4347: 4314:, retrieved 4309: 4303: 4270: 4246:419 J/kg-°C 3785: 3764:419 J/kg-°C 2859: 2838:26-27% IACS 2759:414—600 MPa 2748:214—262 MPa 2718:221—269 MPa 2537: 2516:419 J/kg-°C 1612: 1591:419 J/kg-°C 1326: 1305:419 J/kg-°C 634: 632: 628: 606: 298: 200: 191:monkey metal 178: 174:Morris Ashby 171: 159: 140: 136:spin casting 129: 84: 82: 75: 50: 42: 38: 37: 5337:Zinc alloys 4189:80 Brinell 4170:60,000 psi 4159:31,000 psi 4129:41,300 psi 4118:41,300 psi 3801:Impurities 3674:91 Brinell 3655:87,000 psi 3644:38,000 psi 3603:43,000 psi 2882:Impurities 2781:91 Brinell 2737:Elongation 2710:46,000 psi 2556:Impurities 2426:97 Brinell 2407:60,000 psi 2396:31,000 psi 2355:30,200 psi 2344:38,900 psi 1632:Impurities 1515:Elongation 1345:Impurities 1329:orange peel 1196:93,000 psi 1185:46,000 psi 1144:52,000 psi 1133:58,000 psi 663:Impurities 332:UK BS 1004 268:GB 8738-88 213:Zinc ingot 47:trademarked 45:, formerly 34:Zamak ingot 27:Metal alloy 5229:2023-08-26 5210:2008-02-29 5189:2008-02-29 5160:2008-03-01 5132:2008-03-01 5104:2008-03-09 5083:2008-02-27 5059:2008-03-15 5033:2008-02-27 5007:2008-02-27 4981:2008-02-27 4953:2008-02-27 4903:2008-03-15 4851:2008-02-29 4825:2008-03-01 4804:2008-02-26 4776:2008-02-26 4748:2008-03-01 4705:2008-02-27 4667:2010-10-31 4579:2008-02-10 4523:2008-02-10 4452:2008-02-25 4422:, Harrap, 4405:2008-02-29 4354:2008-03-02 4316:2008-03-02 4296:References 4238:2.5 μΩ-in 4235:6.4 μΩ-cm 4224:113 W/m-K 4181:6,820 psi 4005:GB8738-88 3666:8,300 psi 3484:GB8738-88 2770:48—57 MPa 2418:7,000 psi 2231:GB8738-88 1572:105 W/m-K 1272:105 W/m-K 1207:8,600 psi 1025:GB8738-88 254:Australia 249:JIS H5301 246:JIS H2201 235:ASTM B240 138:industry. 4877:April 19, 4448:, Nyrstar 4285:Pot metal 4186:Hardness 4178:47.0 MPa 4096:Property 3806:Standard 3731:109 W/mK 3671:Hardness 3570:Property 2887:Standard 2866:ductility 2805:6.6 g/cm 2778:Hardness 2688:Property 2561:Standard 2483:113 W/mK 2461:6.7 g/cm 2423:Hardness 2322:Property 2310:Impurity 1637:Standard 1583:25% IACS 1550:6.6 g/cm 1523:Hardness 1477:Property 1350:Standard 1212:Hardness 1111:Property 668:Standard 491:ZnAl4Cu1 356:ZnAl4Cu3 353:Kirksite 282:CSA HZ11 238:ASTM B86 197:Standards 187:Avonmouth 157:process. 149:use of a 143:zinc pest 114:Magnesium 108:Aluminium 83:The name 67:magnesium 63:aluminium 5331:Category 4279:See also 4167:414 MPa 4156:214 MPa 4126:285 MPa 4115:285 MPa 3753:110 J/g 3706:Density 3652:600 MPa 3641:262 MPa 3600:295 MPa 2862:hardness 2802:Density 2707:317 MPa 2505:110 J/g 2458:Density 2404:414 MPa 2393:214 MPa 2352:208 MPa 2341:268 MPa 1547:Density 1518:< 2% 1391:Nyrstar 1331:effect. 1294:110 J/g 1247:Density 1193:641 MPa 1182:317 MPa 1141:361 MPa 647:mandrels 635:Kirksite 558:Alloy 7 552:ZnAl4Ni 549:Zamak 7 512:Alloy B 497:Alloy 5 488:Zamak 5 472:Zamak 4 435:Alloy A 420:Alloy 3 411:Zamak 3 362:Alloy 2 349:Zamak 2 290:ISO 301 279:CSA HZ3 227:EN12844 210:Country 155:refining 151:refluxer 132:die cast 105:(zinc), 4137:58.0 J 3782:Zamak 7 3682:96 GPa 3663:57 MPa 3543:0.0015 3476:0.0005 3405:AS1881 2856:Zamak 5 2534:Zamak 4 2434:96 GPa 2415:48 MPa 2290:0.0015 2223:0.0005 2152:AS1881 1609:Zamak 3 1223:96 GPa 1204:59 MPa 1084:0.0015 625:Zamak 2 596:Z33523 582:Z33522 561:AG 40B 541:Z35531 532:ZP0410 521:Z35530 515:Z-A4UI 503:ZL0410 500:AC 41A 464:Z33520 455:ZP0400 444:Z35521 426:ZL0400 423:AG 40A 403:Z35541 397:ZP0430 386:Z35540 380:Z-A4U3 368:ZL0430 365:AC 43A 317:Common 276:Canada 224:EN1774 221:Europe 91:of the 89:acronym 4924:  4737:ZN-004 4602:  4426:  4067:0.075 4064:0.001 4061:0.002 4058:0.002 4032:0.005 3988:0.075 3985:0.001 3982:0.002 3979:0.003 3953:0.005 3938:0.005 3909:0.075 3906:0.001 3903:0.002 3900:0.002 3809:Limit 3546:0.035 3540:0.003 3537:0.004 3479:0.001 3473:0.001 3464:0.001 3461:0.003 3458:0.003 3385:0.003 3382:0.004 3379:0.005 3309:0.075 3306:0.001 3303:0.002 3300:0.003 3227:0.002 3224:0.005 3221:0.005 3180:0.025 3154:0.001 3148:0.001 3145:0.003 3142:0.003 3101:0.035 3069:0.003 3066:0.004 3063:0.005 2993:0.075 2990:0.002 2987:0.003 2984:0.004 2890:Limit 2664:0.075 2661:0.002 2658:0.002 2655:0.003 2564:Limit 2293:0.035 2287:0.003 2284:0.004 2226:0.001 2220:0.001 2211:0.001 2208:0.003 2205:0.003 2132:0.003 2129:0.004 2126:0.005 2056:0.075 2053:0.001 2050:0.002 2047:0.003 1974:0.002 1971:0.005 1968:0.005 1927:0.025 1901:0.001 1895:0.001 1892:0.003 1889:0.003 1848:0.035 1816:0.003 1813:0.004 1810:0.005 1769:0.025 1740:0.035 1737:0.002 1734:0.003 1731:0.004 1690:0.025 1640:Limit 1453:0.020 1450:0.001 1447:0.003 1444:0.003 1353:Limit 1087:0.035 1081:0.003 1078:0.004 1005:0.002 1002:0.005 999:0.005 958:0.025 932:0.001 926:0.001 923:0.003 920:0.003 879:0.035 847:0.003 844:0.004 841:0.005 800:0.025 771:0.075 768:0.002 765:0.003 762:0.004 721:0.025 671:Limit 555:Ingot 494:Ingot 477:Ingot 417:Ingot 414:ZnAl4 359:Ingot 344:Other 329:China 265:China 243:Japan 164:well. 120:Kupfer 97:metals 93:German 87:is an 71:copper 69:, and 55:alloys 5184:(PDF) 4661:(PDF) 4654:(PDF) 4573:(PDF) 4517:(PDF) 4381:(PDF) 4374:(PDF) 4070:0.02 4055:0.02 4017:0.01 3991:0.02 3976:0.02 3973:0.25 3897:0.02 3859:0.01 3775:0.08 3534:0.06 3496:0.03 3467:0.05 3455:0.06 3452:1.25 3417:0.04 3414:0.75 3388:0.01 3376:0.06 3373:1.25 3338:0.02 3335:0.75 3297:0.06 3294:1.25 3259:0.03 3256:0.75 3236:0.03 3233:0.02 3230:0.05 3218:0.06 3157:0.02 3151:0.02 3139:0.06 3060:0.06 3057:1.25 3022:0.03 3019:0.75 2981:0.06 2978:1.25 2943:0.03 2940:0.75 2652:0.06 2614:0.03 2527:0.07 2281:0.06 2243:0.03 2214:0.05 2202:0.06 2199:0.03 2164:0.04 2135:0.01 2123:0.06 2120:0.25 2085:0.02 2044:0.06 2041:0.03 2006:0.03 1983:0.03 1980:0.02 1977:0.05 1965:0.06 1904:0.02 1898:0.02 1886:0.06 1883:0.03 1807:0.05 1804:0.25 1728:0.05 1602:0.08 1316:0.08 1075:0.06 1037:0.03 1014:0.03 1011:0.02 1008:0.05 996:0.06 935:0.02 929:0.02 917:0.06 838:0.05 759:0.05 590:Cast 570:ZX02 535:ZDC1 529:Cast 518:Z410 509:ZX03 458:ZDC2 452:Cast 441:Z400 438:Z-A4 432:ZX01 394:Cast 383:Z430 374:ZX04 320:ASTM 314:Form 179:Mazak 168:Mazak 85:zamak 51:MAZAK 43:Zamac 39:ZAMAK 18:ZAMAK 4922:ISBN 4879:2011 4600:ISBN 4424:ISBN 4267:Uses 4148:14% 4052:0.1 4049:4.3 4046:max 4011:3.9 4008:min 3970:4.3 3967:max 3932:3.5 3929:min 3894:0.1 3891:4.3 3888:max 3853:3.9 3850:min 3531:1.1 3528:4.3 3525:max 3493:0.7 3490:3.9 3487:min 3449:4.3 3446:max 3411:3.9 3408:min 3370:4.3 3367:max 3332:3.5 3329:min 3291:4.3 3288:max 3253:3.9 3250:min 3215:1.2 3212:4.3 3209:max 3177:0.7 3174:3.7 3171:min 3136:1.1 3133:4.2 3130:max 3098:0.7 3095:3.8 3092:min 3072:0.1 3054:4.3 3051:max 3016:3.5 3013:min 2975:4.3 2972:max 2937:3.9 2934:min 2649:0.5 2646:4.3 2643:max 2611:0.3 2608:3.9 2605:min 2278:0.1 2275:4.3 2272:max 2237:3.9 2234:min 2196:4.3 2193:max 2158:3.9 2155:min 2117:4.3 2114:max 2079:3.5 2076:min 2038:4.3 2035:max 2000:3.9 1997:min 1962:0.1 1959:4.3 1956:max 1921:3.7 1918:min 1880:4.2 1877:max 1842:3.8 1839:min 1819:0.1 1801:4.3 1798:max 1763:3.5 1760:min 1725:0.1 1722:4.3 1719:max 1684:3.9 1681:min 1441:0.6 1438:3.5 1435:4.2 1432:max 1403:0.4 1400:2.5 1397:3.8 1394:min 1072:3.1 1069:4.3 1066:max 1034:2.6 1031:3.9 1028:min 993:3.3 990:4.3 987:max 955:2.7 952:3.7 949:min 914:3.3 911:4.2 908:max 876:2.7 873:3.8 870:min 850:0.1 835:2.9 832:4.3 829:max 797:2.6 794:3.5 791:min 756:2.9 753:4.3 750:max 718:2.6 715:3.9 712:min 341:UNS 326:JIS 117:and 102:Zink 59:zinc 41:(or 3842:Tl 3839:In 3836:Si 3833:Ni 3830:Fe 3827:Sn 3824:Cd 3821:Pb 3818:Mg 3815:Cu 3812:Al 3625:2% 3621:max 2926:Zn 2923:Tl 2920:In 2917:Si 2914:Ni 2911:Fe 2908:Sn 2905:Cd 2902:Pb 2899:Mg 2896:Cu 2893:Al 2740:7% 2597:Tl 2594:In 2591:Si 2588:Ni 2585:Fe 2582:Sn 2579:Cd 2576:Pb 2573:Mg 2570:Cu 2567:Al 2377:3% 2373:max 1673:Tl 1670:In 1667:Si 1664:Ni 1661:Fe 1658:Sn 1655:Cd 1652:Pb 1649:Mg 1646:Cu 1643:Al 1618:3. 1386:Tl 1383:In 1380:Si 1377:Ni 1374:Fe 1371:Sn 1368:Cd 1365:Pb 1362:Mg 1359:Cu 1356:Al 1174:6% 1162:max 704:Tl 701:In 698:Si 695:Ni 692:Fe 689:Sn 686:Cd 683:Pb 680:Mg 677:Cu 674:Al 639:die 232:US 49:as 5333:: 5168:^ 5067:^ 5041:^ 5015:^ 4989:^ 4961:^ 4933:^ 4886:^ 4833:^ 4784:^ 4756:^ 4713:^ 4675:^ 4614:^ 4531:^ 4475:^ 4461:^ 4389:^ 4324:^ 4079:- 4076:- 4073:- 4041:- 4038:- 4035:- 4029:- 4026:- 4023:- 4020:- 4014:- 4000:- 3997:- 3994:- 3962:- 3959:- 3956:- 3950:- 3947:- 3944:- 3941:- 3935:- 3921:- 3918:- 3915:- 3912:- 3883:- 3880:- 3877:- 3874:- 3871:- 3868:- 3865:- 3862:- 3856:- 3558:- 3555:- 3552:- 3549:- 3520:- 3517:- 3514:- 3511:- 3508:- 3505:- 3502:- 3499:- 3470:- 3441:- 3438:- 3435:- 3432:- 3429:- 3426:- 3423:- 3420:- 3400:- 3397:- 3394:- 3391:- 3362:- 3359:- 3356:- 3353:- 3350:- 3347:- 3344:- 3341:- 3321:- 3318:- 3315:- 3312:- 3283:- 3280:- 3277:- 3274:- 3271:- 3268:- 3265:- 3262:- 3242:- 3239:- 3204:- 3201:- 3198:- 3195:- 3192:- 3189:- 3186:- 3183:- 3163:- 3160:- 3125:- 3122:- 3119:- 3116:- 3113:- 3110:- 3107:- 3104:- 3084:- 3081:- 3078:- 3075:- 3046:- 3043:- 3040:- 3037:- 3034:- 3031:- 3028:- 3025:- 3005:- 3002:- 2999:- 2996:- 2967:- 2964:- 2961:- 2958:- 2955:- 2952:- 2949:- 2946:- 2676:- 2673:- 2670:- 2667:- 2638:- 2635:- 2632:- 2629:- 2626:- 2623:- 2620:- 2617:- 2305:- 2302:- 2299:- 2296:- 2267:- 2264:- 2261:- 2258:- 2255:- 2252:- 2249:- 2246:- 2240:- 2217:- 2188:- 2185:- 2182:- 2179:- 2176:- 2173:- 2170:- 2167:- 2161:- 2147:- 2144:- 2141:- 2138:- 2109:- 2106:- 2103:- 2100:- 2097:- 2094:- 2091:- 2088:- 2082:- 2068:- 2065:- 2062:- 2059:- 2030:- 2027:- 2024:- 2021:- 2018:- 2015:- 2012:- 2009:- 2003:- 1989:- 1986:- 1951:- 1948:- 1945:- 1942:- 1939:- 1936:- 1933:- 1930:- 1924:- 1910:- 1907:- 1872:- 1869:- 1866:- 1863:- 1860:- 1857:- 1854:- 1851:- 1845:- 1831:- 1828:- 1825:- 1822:- 1793:- 1790:- 1787:- 1784:- 1781:- 1778:- 1775:- 1772:- 1766:- 1752:- 1749:- 1746:- 1743:- 1714:- 1711:- 1708:- 1705:- 1702:- 1699:- 1696:- 1693:- 1687:- 1465:- 1462:- 1459:- 1456:- 1427:- 1424:- 1421:- 1418:- 1415:- 1412:- 1409:- 1406:- 1323:KS 1099:- 1096:- 1093:- 1090:- 1061:- 1058:- 1055:- 1052:- 1049:- 1046:- 1043:- 1040:- 1020:- 1017:- 982:- 979:- 976:- 973:- 970:- 967:- 964:- 961:- 941:- 938:- 903:- 900:- 897:- 894:- 891:- 888:- 885:- 882:- 862:- 859:- 856:- 853:- 824:- 821:- 818:- 815:- 812:- 809:- 806:- 803:- 783:- 780:- 777:- 774:- 745:- 742:- 739:- 736:- 733:- 730:- 727:- 724:- 593:- 579:- 576:- 573:- 567:- 564:- 538:- 461:- 400:- 377:- 371:- 351:or 293:- 271:- 193:. 111:, 73:. 65:, 5294:. 5246:. 5232:. 4928:. 4907:. 4608:. 4456:. 4432:. 20:)

Index

ZAMAK

trademarked
alloys
zinc
aluminium
magnesium
copper
zinc aluminium
acronym
German
metals
New Jersey Zinc Company
die cast
spin casting
zinc pest
New Jersey Zinc's
refluxer
refining
chromate conversion coated
Morris Ashby
National Smelting
Avonmouth
monkey metal
die
injection molding
mandrels
orange peel
de facto standard
die soldering

Text is available under the Creative Commons Attribution-ShareAlike License. Additional terms may apply.