22:
164:
over time and is impermeable), resin and aggregates are thoroughly mixed together prior to laying, ensuring that the aggregate is completely coated and so providing a totally bound surface. As a result, a resin-bound surface is more durable and requires less maintenance – it needs to be swept or power washed at least twice a year, to avoid the build-up of detritus and prevent the growth of moss or algae.
228:. These are a cost-effective and practical alternative to metal tree grilles that are stolen for scrap value, are costly to purchase and harbour litter thus increasing maintenance costs for local authorities and tax payers. Tree pit systems work in a similar way to UV resin-bound surfacing systems only using larger aggregates to allow more water to permeate through to feed the trees they surround.
185:
standard requirements when tested to BS 8204-6:2008+A1:2010 Appendix B for slip resistance. This ratio is sufficient to install at a minimum depth of 15 mm at a coverage rate of approximately 4.0 m and is suitable for pedestrian traffic. For vehicular traffic of up to 7.5 tonnes a minimum of 18 mm is required at a coverage rate of approximately 3.3 m.
163:
The system is mixed on site and cold applied, using a high-quality clear UV resistant resin binder to coat the aggregate particles prior to laying. Unlike resin-bonded surfacing, where a thin layer of resin is applied to the surface and then the aggregate scattered on top (which can then become loose
188:
The usage of higher-quality UV polyurethane resins ensures greater flexural performance for external applications and the resin will not yellow (non UV aromatic) in appearance when exposed to UV light, the presence also provides greater protection from UV degradation. Non light-stable polyurethanes,
180:
The UV resin sourced should be a two-part, quality-controlled polyurethane or similar with the activator added during the manufacturing process to eradicate mistakes on site made by operatives who are not qualified chemists. Too much activator or too little can affect the performance of the product.
242:
Resin bound gravel is particularly sensitive to moisture during the curing process and the presence of water in the mix can cause a reaction in which the polyurethane binder becomes white and bubbles start to form. This issue is quite common but is often due to poor installation practices. Moisture
184:
The ratio of resin to aggregate should be at the optimal amount (7% resin to aggregate) depending on the application and environment type, and stone type which should be kiln dried mixed aggregate incorporating 2-5 mm sizes to ensure that the aggregate gets sufficiently coated and also to meet the
176:
The UV 2 part polyurethane resin should always be sourced from a manufacturer who can demonstrate that they have BS EN UKAS ISO9001 quality management standards (available information on the FeRFA website). All companies conforming to this will be able to provide documentation on request. The
209:
Natural aggregate and recycled rubber blends are available from UKAS ISO9001 manufacturers and are suitable for pathways and nature walks where environmental benefits are required from the specifier. The resins available should be UV resistant polyurethanes.
189:
although marketed as strong in performance, they will rabidly dis-colour and degrade and are only suited to internal applications where they are not in direct sunlight. Internal resin-bound applications are generally known as stone carpet.
246:
Decorative coloured recycled crushed glass and pigmented quartzes are suitable generally for visual purposes only, as they are susceptible to damage due to having low crush values, and so will become damaged if walked on.
205:
mix blends tested to BS 8204-6:2008+A1:2010 Appendix B for slip resistance will, when installed correctly, provide a slip-resistant, permeable, decorative finish suitable for pedestrian and light vehicular traffic.
177:
resin-bound aggregate mix will generally be a mix of natural aggregates that must be kiln dried to prevent moisture coming in contact with polyurethanes and causing discolouration and poor performance.
234:
systems are generally installed at a depth of 40 to 50 mm, depending on the specification; they have a reduced ratio of 6% UV light stable polyurethane resin to 100 kg kiln dried aggregate.
243:
should be completely eliminated from any aggregate used in the mix and the use of kiln-dried sand and gravels is vital to the success and integrity of the surface.
213:
UV resin-bound paving is a fully permeable paving solution which allows water to freely drain through the surface. Meeting the requirements of
221:. This may also mitigate the need for planning permission when installing a resin driveway, depending on jurisdiction, as they are permeable.
225:
94:
66:
73:
224:
Resin-bound systems incorporating 6-10mm dried aggregates and larger sizes are generally used as tree surrounds known as
43:
256:
214:
320:
113:
80:
51:
62:
47:
181:
The activator has a high risk to health and safety and serious consideration must be given when handling it.
276:
340:
170:
Resin-bound surfacing conforms to the guidance notes set out by the Resin
Flooring Association (FeRFA).
32:
36:
87:
130:
8:
271:
217:(SUDS) standards, this helps to prevent standing water and largely eliminates surface
149:
303:
173:
The quality of the resin-bound surfacing is dependent on a variety of factors.
334:
291:
286:
261:
218:
202:
145:
141:
21:
281:
266:
231:
198:
155:
It is a flexible surfacing material, so is resistant to cracking.
137:
133:
315:
325:
332:
304:https://www.ferfa.org.uk/guidance/publications/
50:. Unsourced material may be challenged and
114:Learn how and when to remove this message
333:
326:Scottish Environment Protection Agency
48:adding citations to reliable sources
15:
13:
257:Sustainable urban drainage systems
215:Sustainable urban drainage systems
14:
352:
309:
237:
20:
192:
1:
297:
277:Permeability (earth sciences)
7:
250:
158:
10:
357:
316:https://www.ferfa.org.uk/
148:, etc. It is a kind of
321:The Environment Agency
63:"Resin-bound paving"
44:improve this article
341:Road infrastructure
272:Impervious surface
127:Resin-bound paving
124:
123:
116:
98:
348:
150:permeable paving
129:is a mixture of
119:
112:
108:
105:
99:
97:
56:
24:
16:
356:
355:
351:
350:
349:
347:
346:
345:
331:
330:
312:
300:
253:
240:
195:
167:
161:
120:
109:
103:
100:
57:
55:
41:
25:
12:
11:
5:
354:
344:
343:
329:
328:
323:
318:
311:
310:External links
308:
307:
306:
299:
296:
295:
294:
289:
284:
279:
274:
269:
264:
259:
252:
249:
239:
236:
194:
191:
160:
157:
122:
121:
28:
26:
19:
9:
6:
4:
3:
2:
353:
342:
339:
338:
336:
327:
324:
322:
319:
317:
314:
313:
305:
302:
301:
293:
290:
288:
285:
283:
280:
278:
275:
273:
270:
268:
265:
263:
260:
258:
255:
254:
248:
244:
238:Disadvantages
235:
233:
229:
227:
222:
220:
216:
211:
207:
204:
200:
190:
186:
182:
178:
174:
171:
168:
165:
156:
153:
151:
147:
143:
140:used to pave
139:
135:
132:
128:
118:
115:
107:
104:February 2010
96:
93:
89:
86:
82:
79:
75:
72:
68:
65: –
64:
60:
59:Find sources:
53:
49:
45:
39:
38:
34:
29:This article
27:
23:
18:
17:
292:Urban runoff
287:Road surface
262:Bioretention
245:
241:
230:
223:
219:water runoff
212:
208:
196:
193:Applications
187:
183:
179:
175:
172:
169:
166:
162:
154:
126:
125:
110:
101:
91:
84:
77:
70:
58:
42:Please help
30:
298:References
152:solution.
74:newspapers
226:tree pits
203:aggregate
199:pavements
146:driveways
142:footpaths
131:aggregate
31:does not
335:Category
282:Porosity
267:Bioswale
251:See also
232:Tree Pit
201:natural
159:Overview
88:scholar
52:removed
37:sources
134:stones
90:
83:
76:
69:
61:
138:resin
95:JSTOR
81:books
136:and
67:news
35:any
33:cite
197:In
46:by
337::
144:,
117:)
111:(
106:)
102:(
92:·
85:·
78:·
71:·
54:.
40:.
Text is available under the Creative Commons Attribution-ShareAlike License. Additional terms may apply.
