203:
255:
gain at the cut-off frequency. The resulting
Linkwitz–Riley filter has −6 dB gain at the cut-off frequency. This means that, upon summing the low-pass and high-pass outputs, the gain at the crossover frequency will be 0 dB, so the crossover behaves like an
206:
Comparison of the magnitude response of the summed
Butterworth and Linkwitz–Riley low-pass and high-pass 2nd-order filters. The Butterworth filters have a +3dB peak at the crossover frequency, whereas the L-R filters have a flat summed
371:
filters. Their slope is 24 dB/octave (80 dB/decade). The phase difference amounts to 360°, i.e. the two drives appear in phase, albeit with a full period time delay for the low-pass section.
288:)-order Linkwitz–Riley crossover can be designed. However, crossovers of order higher than 4 may have less usability due to their complexity and the increasing size of the peak in
247:
filter. A Linkwitz–Riley "L-R" crossover consists of a parallel combination of a low-pass and a high-pass L-R filter. The filters are usually designed by cascading two
189:
316:
Second-order
Linkwitz–Riley crossovers (LR2) have a 12 dB/octave (40 dB/decade) slope. They can be realized by cascading two one-pole filters, or using a
391:
Eighth-order
Linkwitz–Riley crossovers (LR8) have a very steep, 48 dB/octave (160 dB/decade) slope. They can be constructed by cascading two 4th-order
367:
Fourth-order
Linkwitz–Riley crossovers (LR4) are probably today's most commonly used type of audio crossover. They are constructed by cascading two 2nd-order
439:
182:
236:
175:
525:
560:
434:
100:
272:
crossovers, whose summed output has a +3 dB peak around the crossover frequency. Since cascading two
565:
224:
117:
65:
33:
555:
111:
570:
123:
83:
8:
419:
414:
409:
392:
368:
277:
269:
248:
232:
128:
40:
337:
317:
90:
22:
495:
341:
95:
45:
404:
336:
this is usually done by reversing the polarity of one driver if the crossover is
257:
228:
60:
50:
465:
265:
549:
105:
55:
424:
252:
202:
429:
333:
332:
output of the filter, which can be corrected by inverting one signal. In
289:
268:. This is the biggest advantage of L-R crossovers compared to even-order
161:
243:
in the
Journal of the Audio Engineering Society. It is also known as a
156:
151:
146:
261:
375:
351:
300:
329:
344:
crossovers inversion is usually done using a unity gain inverting
325:
345:
324:
value of 0.5. There is a 180° phase difference between the
496:"Active Crossover Networks for Noncoincident Drivers"
466:"Active Crossover Networks for Noncoincident Drivers"
526:"Linkwitz-Riley Crossovers: A Primer (RaneNote 160)"
284:)-order Linkwitz–Riley filter, theoretically any (2
241:
Active
Crossover Networks for Noncoincident Drivers
376:Eighth-order Linkwitz–Riley crossover (LR8, LR-8)
352:Fourth-order Linkwitz–Riley crossover (LR4, LR-4)
301:Second-order Linkwitz–Riley crossover (LR2, LR-2)
547:
239:. This filter type was originally described in
459:
457:
455:
183:
452:
519:
517:
515:
487:
190:
176:
251:filters, each of which has −3
493:
470:Journal of the Audio Engineering Society
464:Linkwitz, Siegfried H. (February 1976).
463:
201:
512:
16:Type of electronic filter used in audio
548:
523:
435:Linkwitz–Riley Crossovers: A Primer
13:
264:response with a smoothly changing
14:
582:
292:around the crossover frequency.
494:Linkwitz, Siegfried H. (1976).
295:
227:filter used in Linkwitz–Riley
1:
445:
66:Optimum "L" (Legendre) filter
430:Linkwitz Lab: Active Filters
231:, named after its inventors
7:
398:
10:
587:
561:Network synthesis filters
225:infinite impulse response
118:Bridged T delay equaliser
34:Network synthesis filters
440:Glossary: Linkwitz–Riley
425:Linkwitz Lab: Crossovers
84:Image impedance filters
51:Elliptic (Cauer) filter
280:filters will give a (2
260:filter, having a flat
208:
124:Composite image filter
524:Bohn, Dennis (2005).
205:
101:General image filters
71:Linkwitz–Riley filter
245:Butterworth squared
108:(constant R) filter
531:. Rane Corporation
420:Siegfried Linkwitz
415:Partition of unity
410:Butterworth filter
233:Siegfried Linkwitz
209:
41:Butterworth filter
25:electronic filters
566:Audio engineering
320:topology with a Q
318:Sallen Key filter
200:
199:
91:Constant k filter
578:
540:
539:
537:
536:
530:
521:
510:
509:
507:
506:
491:
485:
484:
482:
481:
461:
388:
387:
383:
364:
363:
359:
313:
312:
308:
229:audio crossovers
192:
185:
178:
96:m-derived filter
46:Chebyshev filter
19:
18:
586:
585:
581:
580:
579:
577:
576:
575:
546:
545:
544:
543:
534:
532:
528:
522:
513:
504:
502:
492:
488:
479:
477:
462:
453:
448:
405:Audio crossover
401:
389:
385:
381:
379:
378:
365:
361:
357:
355:
354:
323:
314:
310:
306:
304:
303:
298:
196:
167:
166:
142:
134:
133:
129:mm'-type filter
86:
76:
75:
61:Gaussian filter
36:
24:
17:
12:
11:
5:
584:
574:
573:
568:
563:
558:
556:Linear filters
542:
541:
511:
486:
450:
449:
447:
444:
443:
442:
437:
432:
427:
422:
417:
412:
407:
400:
397:
377:
374:
353:
350:
321:
302:
299:
297:
294:
266:phase response
213:Linkwitz–Riley
198:
197:
195:
194:
187:
180:
172:
169:
168:
165:
164:
159:
154:
149:
143:
141:Simple filters
140:
139:
136:
135:
132:
131:
126:
121:
115:
112:Lattice filter
109:
103:
98:
93:
87:
82:
81:
78:
77:
74:
73:
68:
63:
58:
53:
48:
43:
37:
32:
31:
28:
27:
15:
9:
6:
4:
3:
2:
583:
572:
571:Filter theory
569:
567:
564:
562:
559:
557:
554:
553:
551:
527:
520:
518:
516:
501:
497:
490:
475:
471:
467:
460:
458:
456:
451:
441:
438:
436:
433:
431:
428:
426:
423:
421:
418:
416:
413:
411:
408:
406:
403:
402:
396:
394:
384:
373:
370:
360:
349:
347:
343:
339:
335:
331:
327:
319:
309:
293:
291:
287:
283:
279:
275:
271:
267:
263:
259:
254:
250:
246:
242:
238:
234:
230:
226:
222:
218:
214:
204:
193:
188:
186:
181:
179:
174:
173:
171:
170:
163:
160:
158:
155:
153:
150:
148:
145:
144:
138:
137:
130:
127:
125:
122:
119:
116:
113:
110:
107:
106:Zobel network
104:
102:
99:
97:
94:
92:
89:
88:
85:
80:
79:
72:
69:
67:
64:
62:
59:
57:
56:Bessel filter
54:
52:
49:
47:
44:
42:
39:
38:
35:
30:
29:
26:
23:Linear analog
21:
20:
533:. Retrieved
503:. Retrieved
500:Linkwitz Lab
499:
489:
478:. Retrieved
473:
469:
390:
366:
334:loudspeakers
315:
296:Common types
285:
281:
273:
244:
240:
220:
216:
212:
210:
70:
393:Butterworth
369:Butterworth
290:group delay
278:Butterworth
270:Butterworth
249:Butterworth
550:Categories
535:2024-05-05
505:2024-05-05
480:2024-05-05
446:References
237:Russ Riley
162:RLC filter
120:(all-pass)
114:(all-pass)
395:filters.
330:high-pass
262:amplitude
157:LC filter
152:RL filter
147:RC filter
476:(1): 2–8
399:See also
326:low-pass
258:all-pass
338:passive
276:-order
207:output.
380:": -->
356:": -->
346:op-amp
342:active
340:. For
305:": -->
223:is an
221:filter
529:(PDF)
382:edit
358:edit
328:and
307:edit
235:and
217:L-R
552::
514:^
498:.
474:24
472:.
468:.
454:^
348:.
253:dB
219:)
211:A
538:.
508:.
483:.
386:]
362:]
322:0
311:]
286:n
282:n
274:n
215:(
191:e
184:t
177:v
Text is available under the Creative Commons Attribution-ShareAlike License. Additional terms may apply.