213:
the same size, or slightly larger (more teeth) than the fixed cog. The same size allows the same gearing, but with coasting option, while a slightly larger freewheel gear allows coasting and easier pedaling for longer or hilly rides. Both could also be freewheels for two different coasting gear selections. Any two different size cogs/freewheels can be used as long as they are within the fitting limits dictated by the length of the frame's dropout slots, and the chain length. Large differences in the number of teeth may require addition or removal of chain links to achieve a proper fit. Also, if rear brakes are used (essential where a freewheel is used) brake pads may need to be adjusted.
225:
thicker 1/8" cogs are ONLY compatible with 1/8" or wider single speed chains. There may be larger (number of teeth) sizes available as well, either custom manufactured or adapted from chain wheels or front sprockets using a number of methods or devices. There are some heavy-duty 3/16" chains designed for BMX use which are compatible with most cogs. However, because these chains usually have taller thicker side plates, they may not work properly with some cogs smaller than 11T or freewheels smaller than 16T.
209:
1.29" x 24 TPI), Campagnolo/Phil Wood (1.32" x 24 TPI) and Old French (33 mm x 1.0 mm). The first two are the most common, with the French threading being older, and a little less common. It is advisable to check with the manufacturer of the hub for lock ring compatibility. Wrong thread type lockrings may easily thread onto the wrong hub, but over time, the poorly-mating thread interface will cause the threads on the hub to become damaged or destroyed.
22:
119:
283:
left side, and a multi speed freewheel on the right. The drum and disc brakes designed for early tandems used standard ISO 1.375" x 24 freewheel threads to attach the disc or drum to the hub. These tandem hubs can easily be adapted for use as single speed flip flop hubs using any combination of two ISO English threaded freewheels.
274:
smaller metric threads and threaded on the outside with standard ISO threads. This allows the hub to use any size or combination of left and right drive freewheels available. Other companies like
Wethepeople also made these dual-threaded metric hubs for a short time before cassette hubs enabled the use of much smaller rear cogs.
270:
freewheels. The first/most common was the ACS South Paw Claw model, available in 16T. Later, a version of this hub was made with small metric BMX (30 mm x 1 mm) threads, left hand on one side and right hand on the other side. These hubs accepted either Left or right side drive freewheels in the smaller 13T-15T sizes.
221:
sufficient to secure a track cog. The force applied to a freewheel is the same as that applied to a fixed cog of the same size, so the missing threads cause no durability issue. Also, a freewheel never imposes reverse torque on the threads, so a freewheel puts less strain on the threads than a fixed cog does.
241:
that are different from the track style. The most common type of BMX flip flop hub has standard ISO freewheel threads on one side and smaller metric BMX threads (30 mm x 1 mm) on the other side that are designed to work with smaller 14T to 15T BMX freewheels. In recent years a few companies
212:
This allows the installation of a cog (or freewheel) on one side of the hub, and another (cog or freewheel) on the other side of the same hub. Reversing the rear wheel allows switching between Fixed/Free drivetrain, between two different size gears, or both. Generally, the freewheel is selected to be
260:
A left side drive crank arm. Although you could simply reverse a normal set of crank arms, the left side and right side specific pedal bosses would be reversed, causing them to tend to come loose and spin out with normal riding. Also, directional pedals would look backwards unless the pedal spindles
224:
Fixed cogs are generally available in a range of sizes from 12T to 23T (number of teeth) and two different widths - for 3/32" and 1/8" chain (thickness of chain teeth). The 3/32" size is made to accommodate narrower 3/32" chains but is also compatible with 1/8" and wider BMX/single speed chains. The
282:
A third type of flip-flop hub is rather rare and not truly a flip flop hub by design, although it can be used in that way. This type of hub has standard ISO 1.375" x 24 tpi on BOTH sides, but it was not intended for two freewheels. These were designed for the use of a drum or disc hand brake on the
208:
The smaller diameter thread on the fixed side has reverse/left-hand threads to accept a lockring. The lockring is reversely threaded to prevent the cog from coming loose when applying reverse/braking power to the pedals. There are also different sized threads for the left hand lockring (English/ISO
269:
Left side drive introduced a different type of flip flop hub for BMX. This hub is a Right Hand/Left Hand flip flop hub. One side of the hub allows the use of normal right hand freewheels, while the other side is threaded with left hand threads (1.375" x 24L tpi) and accepts the new left hand drive
273:
DK Bicycles introduced the Dual Drive hub back in the early 2000s which is a BMX Left/Right drive flip flop hub with the smaller sized metric (30 mm x 1 mm) BMX threads for 13T-15T freewheels, but also includes two threaded adapters, one left and one right, threaded inside to match the
220:
style freewheel can be used on the track threads of the hub. Because of the stepped down lock ring threads, not as many threads of the freewheel engage the hub threads as they would if it were threaded to a freewheel thread, however, this is not a problem since the same number of threads is
228:
Freewheels are available in sizes 13T to 28T and in the same two different widths as the cogs (3/32" and 1/8"). ACS makes a special "FAT" heavy duty BMX freewheel in 14T and 16T with 3/16" teeth compatible only with 3/16" chains. ACS also makes a 15T freewheel that accepts a 3/32" chain.
249:
to the left side of the bike in order to move the sprocket and chain out of harms way for riders who prefer to do grinding tricks using the pegs or pedal on the right side of the bike. Moving the drivetrain to the left side required modification to the design of three components.
193:. The larger diameter thread on the fixed side accepts a standard threaded cog and uses the same size threads as the freewheel side of the hub. The most common standard I.S.O. thread size is 1.375" x 24 tpi (threads per inch), but there are other less common older sizes (
189:, and the other side is threaded for a standard freewheel. Occasionally you may find double-sided fixed hubs with stepped threading on both sides, but these are rare and only a few companies offer them. The fixed side has a stepped-down diameter thread to accept a
261:
were also reversed. Many companies now provide cranksets in which both arms are designed to be drive arms with the appropriate sprocket drive bosses. While this application to BMX is new, this is not a new idea. For decades,
148:
There are several different types of flip flop hubs available for different applications. Their main purpose is to allow changing between two (and only two) different
168:
options. By removing the rear wheel and turning it around, the rider can switch between the two options. They are traditionally found on
338:
311:
86:
328:
58:
216:
The ISO threading for freewheels (Single or
Multiple Speed) is the same as for track/fixed cogs. A standard single-speed
245:
In recent years, an innovation in BMX freestyle riding spawned "Left Side Drive". This component option switches the
105:
65:
254:
A freewheel with left hand threads which threads on and ratchets in the opposite direction for use on the left side.
72:
43:
39:
301:
54:
242:
have started making 13T freewheels compatible with this thread as well, allowing more gearing options.
32:
360:
79:
8:
161:
334:
307:
153:
262:
194:
354:
169:
186:
165:
246:
149:
142:
21:
238:
190:
157:
152:
on one rear wheel without the added complications of a multi-gear
118:
134:
198:
138:
257:
A rear hub with left hand threads to accept the LH freewheel.
202:
330:
The
Noblest Invention: An Illustrated History of the Bicycle
265:
have used left side drive cranks to drive the timing chain.
237:
There are a few different variations of flip-flop hubs for
217:
172:, but can also be found on other single speed bicycles.
46:. Unsourced material may be challenged and removed.
352:
277:
232:
180:
326:
106:Learn how and when to remove this message
117:
137:hubs that are threaded to accept fixed
353:
299:
44:adding citations to reliable sources
15:
185:Usually, one side has a fixed type
13:
14:
372:
20:
327:Armstrong, Lance (2003-11-15).
31:needs additional citations for
320:
293:
1:
286:
7:
278:Drum/disk brake tandem hubs
10:
377:
233:BMX/Single Speed Bicycles
181:Fixed gear/track bicycles
175:
300:Brandt, Jobst (1993).
205:35 mm x 24 TPI).
123:
121:
40:improve this article
201:34.7 x 1 mm,
124:
340:978-1-57954-669-4
313:978-0-9607236-6-9
303:The Bicycle Wheel
197:1.371" x 24 TPI,
187:stepped threading
158:internal hub gear
131:double-sided hubs
116:
115:
108:
90:
368:
345:
344:
324:
318:
317:
297:
111:
104:
100:
97:
91:
89:
48:
24:
16:
376:
375:
371:
370:
369:
367:
366:
365:
351:
350:
349:
348:
341:
325:
321:
314:
298:
294:
289:
280:
263:tandem bicycles
235:
183:
178:
145:on both sides.
122:A flip-flop hub
112:
101:
95:
92:
55:"Flip-flop hub"
49:
47:
37:
25:
12:
11:
5:
374:
364:
363:
347:
346:
339:
319:
312:
291:
290:
288:
285:
279:
276:
267:
266:
258:
255:
234:
231:
182:
179:
177:
174:
170:track bicycles
129:, also called
127:Flip-flop hubs
114:
113:
28:
26:
19:
9:
6:
4:
3:
2:
373:
362:
361:Bicycle parts
359:
358:
356:
342:
336:
332:
331:
323:
315:
309:
305:
304:
296:
292:
284:
275:
271:
264:
259:
256:
253:
252:
251:
248:
243:
240:
230:
226:
222:
219:
214:
210:
206:
204:
200:
196:
192:
188:
173:
171:
167:
163:
160:, or between
159:
155:
151:
146:
144:
140:
136:
132:
128:
120:
110:
107:
99:
96:February 2022
88:
85:
81:
78:
74:
71:
67:
64:
60:
57: –
56:
52:
51:Find sources:
45:
41:
35:
34:
29:This article
27:
23:
18:
17:
329:
322:
302:
295:
281:
272:
268:
244:
236:
227:
223:
215:
211:
207:
184:
147:
130:
126:
125:
102:
93:
83:
76:
69:
62:
50:
38:Please help
33:verification
30:
150:gear ratios
133:, are rear
333:. Rodale.
306:. Avocet.
287:References
247:drivetrain
154:derailleur
143:freewheels
66:newspapers
239:BMX bikes
166:freewheel
355:Category
191:lockring
203:Italian
195:British
141:and/or
135:bicycle
80:scholar
337:
310:
199:French
82:
75:
68:
61:
53:
176:Types
162:fixed
87:JSTOR
73:books
335:ISBN
308:ISBN
164:and
139:cogs
59:news
218:BMX
156:or
42:by
357::
343:.
316:.
109:)
103:(
98:)
94:(
84:·
77:·
70:·
63:·
36:.
Text is available under the Creative Commons Attribution-ShareAlike License. Additional terms may apply.