Knowledge

Bend radius

Source 📝

25: 178: 278: 213:. The minimum bending radius will vary with different cable designs. The manufacturer should specify the minimum radius to which the cable may safely be bent during installation and for the long term. The former is somewhat larger than the latter. The minimum bend radius is in general also a function of tensile stresses, 221:
Besides mechanical destruction, another reason why one should avoid excessive bending of fiber-optic cables is to minimize microbending and macrobending losses. Microbending causes light attenuation induced by deformation of the fiber while macrobending causes the leakage of light through the fiber
217:
during installation, while being bent around a sheave while the fiber or cable is under tension. If no minimum bend radius is specified, one is usually safe in assuming a minimum long-term low-stress radius not less than 15 times the cable diameter, or 2 inches.
282: 253: 287: 89: 61: 161: 108: 68: 293: 46: 233:
also have a minimum bending radius. This radius is the radius below which the strain gauge will malfunction.
75: 42: 57: 35: 319: 16:
The minimum radius to which one can bend a pipe, tube, sheet, cable, or hose without damage
8: 82: 210: 324: 206: 174:). The diagram to the right illustrates a cable with a seven-centimeter bend radius. 137: 297: 314: 133: 236:
For metal tubing, bend radius is to the centerline of tubing, not the exterior.
222:
cladding and this is more likely to happen where the fiber is excessively bent.
329: 308: 149: 230: 141: 205:
The minimum bend radius is of particular importance in the handling of
194: 168: 145: 125: 24: 190: 129: 177: 152:
without kinking it, damaging it, or shortening its life. The
49:. Unsourced material may be challenged and removed. 306: 181:Cable with a seven-centimeter bend radius 109:Learn how and when to remove this message 176: 307: 225: 47:adding citations to reliable sources 18: 13: 124:, which is measured to the inside 14: 341: 193:below which an object such as a 160:the material flexibility (as the 281: This article incorporates 276: 23: 294:General Services Administration 200: 34:needs additional citations for 246: 1: 239: 7: 10: 346: 209:, which are often used in 289:Federal Standard 1037C 283:public domain material 258:www.cablinginstall.com 182: 180: 156:the bend radius, the 197:should not be bent. 43:improve this article 187:minimum bend radius 162:radius of curvature 226:Other applications 211:telecommunications 207:fiber-optic cables 183: 128:, is the minimum 119: 118: 111: 93: 337: 302: 301: 296:. Archived from 280: 279: 269: 268: 266: 265: 250: 114: 107: 103: 100: 94: 92: 51: 27: 19: 345: 344: 340: 339: 338: 336: 335: 334: 305: 304: 286: 277: 275: 273: 272: 263: 261: 252: 251: 247: 242: 228: 203: 132:one can bend a 115: 104: 98: 95: 52: 50: 40: 28: 17: 12: 11: 5: 343: 333: 332: 327: 322: 317: 300:on 2022-01-22. 271: 270: 244: 243: 241: 238: 227: 224: 202: 199: 117: 116: 31: 29: 22: 15: 9: 6: 4: 3: 2: 342: 331: 328: 326: 323: 321: 318: 316: 313: 312: 310: 303: 299: 295: 291: 290: 284: 259: 255: 249: 245: 237: 234: 232: 231:Strain gauges 223: 219: 216: 212: 208: 198: 196: 192: 188: 179: 175: 173: 170: 166: 163: 159: 155: 151: 147: 143: 139: 135: 131: 127: 123: 113: 110: 102: 91: 88: 84: 81: 77: 74: 70: 67: 63: 60: –  59: 58:"Bend radius" 55: 54:Find sources: 48: 44: 38: 37: 32:This article 30: 26: 21: 20: 320:Fiber optics 298:the original 288: 274: 262:. Retrieved 257: 248: 235: 229: 220: 214: 204: 201:Fiber optics 186: 184: 171: 164: 157: 153: 121: 120: 105: 96: 86: 79: 72: 65: 53: 41:Please help 36:verification 33: 260:. June 1998 254:"StackPath" 122:Bend radius 309:Categories 264:2020-09-02 240:References 69:newspapers 172:increases 169:curvature 165:decreases 126:curvature 325:Plumbing 99:May 2024 189:is the 158:greater 154:smaller 83:scholar 315:Cables 191:radius 167:, the 130:radius 85:  78:  71:  64:  56:  330:Radii 285:from 215:e.g., 195:cable 146:cable 142:sheet 90:JSTOR 76:books 185:The 150:hose 138:tube 134:pipe 62:news 148:or 45:by 311:: 292:. 256:. 144:, 140:, 136:, 267:. 112:) 106:( 101:) 97:( 87:· 80:· 73:· 66:· 39:.

Index


verification
improve this article
adding citations to reliable sources
"Bend radius"
news
newspapers
books
scholar
JSTOR
Learn how and when to remove this message
curvature
radius
pipe
tube
sheet
cable
hose
radius of curvature
curvature

radius
cable
fiber-optic cables
telecommunications
Strain gauges
"StackPath"
public domain material
Federal Standard 1037C
General Services Administration

Text is available under the Creative Commons Attribution-ShareAlike License. Additional terms may apply.